Urinal

1. Preparation

• Check wall height and mark centreline and bottom level of urinal.
• Ideal height (centre of bowl):
  • Adults: 610–650 mm (24–26 in) from floor
  • Children: 450–500 mm

2.Bracket Fixing

• Mark the bracket/hanger bolt positions on the wall.
• Drill holes and fix with wall plugs and screws or bolts.
• Brackets must be level and firmly secured.

3. Water Supply Connection

• Install flush valve or sensor system at recommended height (around 100–150 mm above urinal).
• Connect it to the water inlet pipe using PTFE tape and wrench.

4. Waste Outlet Setup

• Ensure the waste pipe (PVC or CPVC) is at correct height and slope.
• Use appropriate trap (bottle trap or P-trap) connected to drainage.
• Apply PVC solvent cement at joints.

5. Urinal Mounting

• Hang or fix the urinal onto the brackets or hanger bolts.
• Ensure it fits flush against the wall and aligns with the waste pipe.

6. Sealing & Testing

• Apply silicone sealant around the edges.
• Turn on the water supply.
• Test flush, check for leaks at:
  • Inlet connection
  • Flush valve
  • Outlet pipe