Table top - Wall mounted basin

1. Cut Hole in the Countertop

• Mark the centre of the countertop.
• Drill a drain hole (usually 45–60 mm in diameter) where the basin will sit.
• For semi-recessed basins, cut a larger hole as per template.

2. Position the Basin

• Place the basin on the countertop to ensure fit.
• Make sure it’s centred and aligned with faucet hole (if applicable).
• Mark around the base if needed.

3. Apply Sealant

• Apply a ring of silicone sealant around the hole on the countertop.
• This helps prevent water seepage under the basin.

4. Install the Basin

• Gently press the basin down over the sealant ring.
• Wipe off excess sealant for a clean finish.
• Let the silicone cure for a few hours.

5. Fix the Waste Outlet

• Insert the waste coupling from inside the basin and fix the nut from below.
• Use PTFE tape to prevent leakage.
• Attach the bottle trap or P-trap to the waste pipe.

6. Connect the Water Supply

• Fix angle valves to wall water inlets.
• Connect flexible hoses from the valves to the basin faucet.
• If using a deck-mounted faucet, install it before placing the basin.

7. Test & Finish

• Turn on the water supply.
• Check all connections for leaks.
• Clean the countertop and polish the basin for a finished look.