One Piece Full Basin

1. Position the Basin

• Place the basin on the designated platform (counter, slab, or stand).
• Use a level to ensure it’s even.
• Mark the drain hole position and faucet hole (if applicable).

2. Mark & Drill Holes (if needed)

• Mark holes for waste outlet, faucet, and water inlet pipes.
• Drill required holes on the platform or wall.
• If it’s a pedestal type, mark the floor or wall bracket positions.

3. Apply Sealant or Fix Brackets

• Apply silicone sealant to the bottom of the basin if placed on a countertop.
• If wall-mounted, fix the metal brackets securely to the wall.
• Allow sealant to partially cure (if used) for firm positioning.

4. Install Faucet (Optional)

• Mount the faucet on the basin (if deck-mounted).
• Use rubber washers and PTFE tape to prevent leakage.
• Tighten the fittings from below with a wrench.

5. Fix the Waste Coupling

• Insert the waste coupling in the drain hole and tighten with the locking nut below.
• Use PTFE tape for leak-proof fitting.
• Attach the bottle trap or P-trap.

6. Connect Water Supply

• Fix angle valves to water inlet pipes on the wall.
• Connect flexible hoses from valves to the faucet inlet.
• Ensure all joints are tight and sealed.

7. Check for Leaks & Finish

• Turn on the water supply.
• Test for any leaks at joints and under the basin.
• Clean excess sealant and polish the basin surface.