Colour Wall Mounted Basin

1. Marking the Wall

• Measure and mark the centreline of the basin.
• Recommended height: 80–85 cm from the finished floor to the top edge.
• Mark the bracket/bolt positions on the wall.

2. Fixing Wall Brackets

• Drill holes at the marked points.
• Insert wall plugs and fix brackets or hanger bolts securely using screws.
• Use a spirit level to ensure proper alignment.

3. Mounting the Basin

• Place the basin on the brackets or fix it onto hanger bolts.
• Ensure the basin is level and stable.
• Apply white cement or silicone behind the basin (optional) for extra grip.

4. Connecting the Waste Outlet

• Insert the waste coupling into the basin drain hole.
• Connect the bottle trap or P-trap to the outlet and wall drain pipe.
• Use PTFE tape or rubber washers to ensure a leak-proof connection.

5. Connecting Water Supply

• Fix angle valves to the wall inlets.
• Connect flexible pipes from valves to basin taps.
• Ensure hot and cold lines are connected correctly.

6. Final Checks & Finishing

• Open water supply and check for leaks.
• Apply silicone sealant around the basin if needed.
• Clean the area and make sure all fittings are tight and secure.