Colour Wall Hung Closet

1. Preparation

• Ensure floor outlet (S-trap or P-trap) is correctly aligned.
• Water supply and drainage lines should be tested and clean.
• Confirm the centre distance of the outlet and fixing points as per toilet design.

2.  Marking & Drilling

• Position the WC on the floor to check alignment with the outlet.
• Mark fixing holes through the toilet base.
• Remove the toilet and drill holes for anchor bolts (usually 10mm).

3. Fixing the Trap

• Apply PVC solvent cement to the trap (P or S) and connect it securely to the outlet.
• Ensure the trap is aligned with the toilet pan.

4. Placing the WC Pan

• Place the WC pan over the trap ensuring it fits tightly.
• Insert rubber or wax ring if needed for seal.
• Align it with the bolt holes and fix it using anchor bolts.
• Tighten carefully without cracking the ceramic.

5. Water Connection

• Connect the flush tank inlet to the water supply using a flexible hose.
• For concealed or flush-valve systems, ensure proper alignment with the flush pipe.

6. Sealing

• Apply silicone sealant or white cement around the base to prevent water leakage and pests.

7. Testing

• Open water supply.
• Test flushing system and check for leaks at:
  • Water inlet
  • Flush connection
  • Drain outlet
• Check toilet is stable and doesn't wobble.