Colour Pan

1.Surface Preparation

• Ensure the floor area is clean, level, and dry.
• Mark the position of the drain outlet and the centreline of the pan.
• Create a base with a concrete or brick support bed.

2. Trap Installation

• Fit an S-trap to the floor drain.
• Apply PVC solvent cement on joints.
• Ensure proper slope for drainage.

3. Pan Placement

• Place the ceramic pan over the trap.
• Check alignment and level.
• Use a rubber gasket or sealing compound between the pan and trap.

4. Fixing the Pan

• Fill the space around the base with cement mortar (1:4 mix).
• Smooth the surface and slightly slope the floor toward the pan for proper drainage.

5. Water Connection

• Provide a tap with a hose or flush valve beside the pan.
• For a flushing cistern, connect the pipe to the pan inlet.

6. Final Finishing

• After drying, apply white cement or silicone around the edges for neat sealing.
• Tile around the pan if needed.
• Check for leaks and proper drainage.