Bansi Pink Sandstone

1. Surface Preparation

• Clean the base surface thoroughly.
• Remove dust, oil, and debris.
• Ensure the base is level and strong (concrete or mortar bed is ideal).

2. Layout Planning

• Dry lay the sandstone slabs to check pattern, color variation, and sizing.
• Mark alignment lines with chalk or thread for proper placement.

3. Mixing Adhesive

• Use cement mortar (1 part cement: 4-5 parts sand) or an adhesive suitable for natural stone.
• If using for exterior or wet areas, prefer polymer-modified adhesive.

4. Applying Adhesive

• Spread mortar or adhesive on the base with a notched trowel.
• Also butter the backside of the sandstone slab to ensure full contact.

5. Laying the Sandstone

• Place the stone firmly and gently tap with a rubber mallet.
• Maintain even gaps (3-5 mm) between stone for grout.
• Use spacers if needed.

6. Leveling and Alignment

• Continuously check for level and alignment with a spirit level or straight edge.
• Adjust before mortar sets.

7. Grouting the Joints

• After 24–48 hours of curing, fill the joints using grout or cement slurry.
• Use a sponge to clean excess grout.

8. Cleaning and Sealing

• Clean the surface after installation is complete.
• Once dry, apply stone sealer to protect from stains, water absorption, and enhance the color.

•  Loading, Unloading & Transportation charges applicable accordingly.
• Material will be delivered one week after the order is placed.
• Goods once sold cannot be exchanged or return.
• Term of payment 15 days.